BSC Support FAQ - GSA,Inc. -

Site Map｜

Japanese

WWW GSA,Inc

Customer support

FAQ

BSC Support

FAQ

	Update: 2007/3/27
Q1	When Building Shadow Calculation is installed, the message is displayed.
Q2	Even if the command of Building Shadow Calculation is executed, it doesn't operate.
Q3	If "Second (The angle is shown)" of a red weft is very done to" to change "Worth of second (Time is indicated)" of the approximation difference into "Worth", is it good?
Q4	How should I set it on the calculation day when I do other calculations without making the shade chart?
Q5	The shade line of time on 7 AM is not calculated.
Q6	Can the height of the calculation point be changed?
Q7	Why is the value of the sky factor in the sky chart drawing and the chart of calculation getting product drawing different?
Q8	Can two or more height of the measurement side calculate in shade at a time?
Q9	Can the character filled in on the calculation point such as the shade charts be instructed beforehand (input)?
Q10	After the shade chart etc. are made, can the character filled in on the calculation point be changed?
Q11	The calculation result is not displayed.
Q12	The sunshiny distribution is not displayed.
Q13	When the sunshiny distribution for the section is a mass, it comes in succession, and it is not displayed neatly.
Q14	How is the order when the shade chart is made with two or more calculation points decided?
Q15	The entire balance has worsened when the view standard is changed.
Q16	After the calculation had ended, warning of Autodesk Revit Building was displayed.
Q17	Is there a method of not printing the insertion point?
Q18	Can the color and the thickness of segments of the shade chart and the sunlight curve, etc. be changed?
Q19	Can display/non-display of each calculation result be controlled?

Agreement for use